ConveyLinx-ERSC Family24V Networked Drive Control
ConveyLinx is our advanced high-end networked motor drive controller which provides many innovative features for zero pressure accumulation (ZPA) or ANY application utilizing Senergy 24V motor drives.
- Control 1 or 2 motor/zones
- Built-in ZPA control or bypass and use your PLC
- Modular Plug and Play Design
- Recognizes most all PLC Ethernet-based protocols
ConveyLinx ERSC
- 24V motor drive roller (MDR) control system
- Two zones per module reduces cost and time
- Simple and Easy Single Pushbutton Installation
- ZPA logic built-in for quick installation
- Supports all major PLC Ethernet Protocols
- High torque rated modules available
- Freezer rated modules available
- Accommodates mechanical brake roller option
- On-board programming available
Hardware Features
- Provides control for 1 or 2 ZPA Zones or acts as an 8 In /2 Out Dual Motor control remote I/O unit to a PLC
- 3-Port Ethernet switch with standard RJ-45 ports for easy daisy chaining of network cables from controller
- 9 Pin JST style header socket for motor connection
- 4 RJ-11/12 ports for easy plug and play connections for sensors and interlock signals
- 8 Tri-colored context sensitive LED indicators
- CE Certified, RoHS Compliant, IP20 Environmental
- Learn More...
Functionality Features
- Single push-button Auto-Configuration from a single controller to configure up to 221 controllers on a network
- Automatic control module replacement without external PC or software
- Auto detection and configuration of single zone and 2 motors in one logical zone per controller
- Auto detection of PNP or NPN sensors and light/dark operate when configured for ZPA control
- Thermal and overload motor protection plus optional Proportional-Integral regulated motor speed control
- Motor speed and ramp parameters and ZPA adjustments accessible with EasyRoll Configuration Software
- Automatic Flex-Zone and jam detection recognition and recovery while in ZPA mode
Integration Features
- Recognizes Ethernet I/P, Modbus TCP, Profinet I/O, and CC-Link IE Field Basic protocols on the same controller
- In PLC I/O Mode, can be used as remote motor and I/O control with most all Ethernet equipped PLCs
- Motor speed and performance parameters can be dynamically controlled at run time with remote PLC
- Automatically tracks data for each item on the conveyor in ZPA mode and can make data available to PLC
- Custom programmable with ConveyLogix software to act as a stand alone controller or can be integrated with PLCs
- Parameters and settings for multiple networks of controllers can be backed up, saved, and restored with EasyRoll
- Learn More...
- ODVA - Declaration of Conformity
Title and Version: ODVA Declaration of Conformity
Updated: 2-Apr-2015 Format: PDF
Description: ODVA Declaration of Conformity for all ConveyLinx modules utilizing EthernetIP firmware 5.0 and above per file 11390.01. - ProfiNet - Declaration of Conformity
Title and Version: PROFIBUS/PROFINET Declaration of Conformity
Updated: 13-Apr-2018 Format: PDF
Description: Declaration of Conformity for all ConveyLinx modules utilizing firmware 4.1.0 and above per Certificate Number Z11006. - REACH Statement
Title: Industrial Software REACH Statement
Updated: 05-Mar-2020 Format: PDF
Description: REACH regulation EC 1907/2006) compliance for ConveyLinx, ConveyLinx-ECO, ConveyLinx-Ai, ConveyLinx-Ai2, ConveyLinx-IO, MotionLinx-Ai, MotionLinx-IO, ConveyLinx-DRC, ConveyLinx-DRC-Ai, E-QUBE, EZ-QUBE, E-QUBE-Ai, EZ-24, IQZonz. - RoHS Declaration of Conformity
Title: Declaration of Conformity for RoHS 3
Updated: 04-Feb-2021 Format: PDF
Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for Directive 2015/863/EU (RoHS 3) for ConveyLinx-ERSC, ConveyLinx-HTF, and ZoneMax.
- (Current)_EasyRoll_V4_22
Title: EasyRoll Tool
Version: V4.22 CURRENT VERSION
Description: Configuration software for all ConveyLinx and ConveyLinx-Ai2/Ai3 modules. This version is required for all ConveyLinx-Ai2/Ai3 modules with hardware revision 20 and higher.
See ConveyLinx-Ai Family Complete Guide Section 4.1 Module Hardware Revisions for details.
Please note that these restrictions do not apply to ConveyLinx ERSC family modules. - EasyRoll_V4_07
Title: EasyRoll
Version: V4.07
Description: Configuration software for all ConveyLinx and ConveyLinx-Ai2 modules with hardware Revision 10 or lower.
Minimum ConveyLinx firmware required: 4.24
ConveyLinx-Ai2 firmware required: Any
EasyRoll V4.22 is required for ConveyLinx-Ai2/Ai3 hardware revision 20 and higher.
This is the last EasyRoll version that includes Itoh motor profiles - EasyRoll_V4_21
Title: EasyRoll
Version: V4.21
Description: Configuration software for ConveyLinx and ConveyLinx-Ai2/Ai3 family modules with hardware revision 10 or lower. See ConveyLinx-Ai Family Complete Guide Section 4.1 Module Hardware Revisions for details.
Minimum ConveyLinx ERSC Firmware: 4.25/5.02
Includes support for slave motor function (ERSC) and earliest version that supports ConveyLinx-Ai3 modules.
- EasyRoll+_v1_2_18
Title: EasyRoll+
Version: V1.2.18
Updated: 8-May-2024 Format: .zip
Description: Configuration software for all ConveyLinx and ConveyLinx-Ai Family networked controllers.
Please note that EasyRoll+ is required for ConveyLinx-Ai2/Ai3 48V models. - EasyRoll+_v1_2_25
Title: EasyRoll+
Version: V1.2.25 CURRENT VERSION
Updated: 17-Sept-2024 Format: .zip
Description: Configuration software for all ConveyLinx and ConveyLinx-Ai Family networked controllers.
Please note that EasyRoll+ is required for ConveyLinx-Ai2/Ai3 48V models and RaptorLinx. - EasyRoll+_v1_2_9
Title: EasyRoll+
Version: V1.2.9
Updated: 18-July-2023 Format: .zip
Description: Configuration software for all ConveyLinx and ConveyLinx-Ai Family networked controllers.
Please note that EasyRoll+ is required for ConveyLinx-Ai2/Ai3 48V models.
- (Current)_ConveyLogix_V2_10
Title: ConveyLogix Programmer
Version: V2.10 CURRENT VERSION
Updated: 20-July-2023 Description: Programmer for writing and loading custom programming into ConveyLinx-ERSC Family, ConveyLinx-Ai2 Family, ConveyLinx-IO, and ConveyNet I/P modules.
Includes support for ConveyLinx-Ai3-48 modules
Programs written in this version are Not backwards compatible with previous ConveyLogix versions - ConveyLogix Programmers Guide
Publication Number: ERSC-1200
Title: ConveyLogix Programmer's Guide
Version: V2.2
Release: July 2016
Description: Complete usage and program instruction reference for ConveyLogix Programming software. - ConveyLogix_V2-02-01
Title: ConveyLogix Programmer
Version: V2.02.01
Description: Programmer for writing and loading custom programming into ConveyLinx-ERSC Family and ConveyNet I/P modules.
Programs written in this version are Not backwards compatible with previous ConveyLogix versions - ConveyLogix_V2-02
Title: ConveyLogix Programmer
Version: V2.02
Description: Programmer for writing and loading custom programming into ConveyLinx-ERSC Family and ConveyNet I/P modules.
Programs written in this version are Not backwards compatible with previous ConveyLogix versions - ConveyLogix_V2-07
Title: ConveyLogix Programmer
Version: V2.07
Description: Programmer for writing and loading custom programming into ConveyLinx-ERSC Family, ConveyLinx-Ai2 Family, ConveyLinx-IO, and ConveyNet I/P modules.
Programs written in this version are Not backwards compatible with previous ConveyLogix versions - ConveyLogix_V2-09
Title: ConveyLogix Programmer
Version: V2.09 CURRENT VERSION
Description: Programmer for writing and loading custom programming into ConveyLinx-ERSC Family, ConveyLinx-Ai2 Family, ConveyLinx-IO, and ConveyNet I/P modules.
Programs written in this version are Not backwards compatible with previous ConveyLogix versions
Title: ConveyLinx Firmware (Legacy)
Version: V4.33
Date: 17-Sep-2024
Description: Backward compatible firmware version for ConveyLinx-ERSC based controllers that use legacy PLC connections.
Title: ODVA Certified Conveylinx Firmware
Version: V5.13
Date: 17-Sep-2024
Description: ODVA Certified firmware version for ConveyLinx-ERSC based controllers.
Do not upgrade to this version if ConveyLinx needs to communicate with existing Ethernet I/P PLC programs that have non-ODVA standard instances
Title: Conveylinx-Ai Family GSDML File
Version: V2.31 Build 20150411
Description: GSDML file containing all Device Access Point (DAP) definitions for ConveyLinx-ERSC Family modules with Firmware 4.25 / 5.02 for import into your Siemens TIA Portal or STEP 7 environments.
Title: Conveylinx-Ai Family GSDML File
Version: V2.33 Build 20210105
Description: GSDML file containing all Device Access Point (DAP) definitions for ConveyLinx-ERSC Family modules with Firmware 4.27 / 5.07 for import into your Siemens TIA Portal or STEP 7 environments.