Downloads

3D Model

CAD Drawing

Part Number: IN-P-DIS-PS-20-120
Description: MDR|POWER 120V - 20 Amp power supply assembly drawing in DWG format. Assembly includes polycarbonite enclosure, safety disconnect switch, and Puls power supply unit.

PDF Drawing

Part Number: IN-P-DIS-PS-20-120
Description: MDR|POWER 120V - 20 Amp power supply assembly drawing in PDF format. Assembly includes polycarbonite enclosure, safety disconnect switch, and Puls power supply unit.

3D Model

CAD Drawing

Part Number: IN-P-DIS-PS-40-120
Description: MDR|POWER 120V - 40 Amp power supply assembly drawing in DWG format. Assembly includes polycarbonite enclosure, safety disconnect switch, and Puls power supply unit.

PDF Drawing

Part Number: IN-P-DIS-PS-40-120
Description: MDR|POWER 120V - 40 Amp power supply assembly drawing in PDF format. Assembly includes polycarbonite enclosure, safety disconnect switch, and Puls power supply unit.

3D Model

CAD Drawing

Part Number: IN-P-DIS-PS-20-480
Description: MDR|POWER 480V - 20 Amp power supply assembly drawing in DWG format. Assembly includes polycarbonite enclosure, safety disconnect switch, and Puls power supply unit.

PDF Drawing

Part Number: IN-P-DIS-PS-20-480
Description: MDR|POWER 480V - 20 Amp power supply assembly drawing in PDF format. Assembly includes polycarbonite enclosure, safety disconnect switch, and Puls power supply unit.

3D Model

CAD Drawing

Part Number: IN-P-DIS-PS-40-480
Description: MDR|POWER 480V - 40 Amp power supply assembly drawing in DWG format. Assembly includes polycarbonite enclosure, safety disconnect switch, and Puls power supply unit.

PDF Drawing

Part Number: IN-P-DIS-PS-40-480
Description: MDR|POWER 480V - 40 Amp power supply assembly drawing in PDF format. Assembly includes polycarbonite enclosure, safety disconnect switch, and Puls power supply unit.

CAD Drawing

Part Number: IN-RJ12-XXX
Description: Cable, RJ12-RJ12 Control Port Interlock Cable XXX cm Length. Drawing in DWG format. Cable is used to provide Control Port handshake interlock between two ERSC modules

PDF Drawing

Part Number: IN-RJ12-XXX
Description: Cable, RJ12-RJ12 Control Port Interlock Cable, XXX CM Length. Drawing in PDF format. Cable is used to provide Control Port handshake interlock between two ERSC modules

CAD Drawing

Part Number: CACRSC-EXT-FL-200
Description: Cable, Flying Lead Motor Extension, 2M Length. Drawing in DWG format. Cable is used to gain access to the individual outputs of a ConveyLinx or IQZonz module's JST motor ports.

PDF Drawing

Part Number: CACRSC-EXT-FL-200
Description: Cable, Flying Lead Motor Extension, 2M Length. Drawing in PDF format. Cable is used to gain access to the individual outputs of a ConveyLinx or IQZonz module's JST motor ports.

CAD Drawing

Part Number: CACRSC-EXT-XXX
Description: PulseRoller Motor Extension Harness drawing in DWG format. Typically used between any Motor Roller with 9 Pin JST type connecor to our ConveyeyLinx or IQZonz modules. Standard lengths are XXX = 50, 150, 150, and 200 cm

PDF Drawing

Part Number: CACRSC-EXT-XXX
Description: PulseRoller Motor Extension Harness drawing in PDF format. Typically used between any Motor Roller with 9 Pin JST type connecor to our ConveyeyLinx or IQZonz modules. Standard lengths are XXX = 50, 150, 150, and 200 cm

Power Distribution Harness

Part Number: PD-XXX
Description: 12 AWG Power Distribution Cable drawing in DWG format. Cables are premade to XXX cm length to easily snap one conveyor section to another in a plug and play fashion. Use with PTK-XX Power Tap Kits

Power Distribution Harness

Part Number: PD-XXX
Description: 12 AWG Power Distribution Cable drawing in PDF format. Cables are premade to XXX cm length to easily snap one conveyor section to another in a plug and play fashion. Use with PTK-XX Power Tap Kits

Power Tap Kit

Part Number: PTK-XX
Description: Power Tap Kit drawing in DWG format. PTK-XX is used in conjunction with the Power Distribution harness in XX cm length. Splice the buss wherever a drop needs to be made for a Conveylinx, IQZonz, or EZ24 module.

Power Tap Kit

Part Number: PTK-XX
Description: Power Tap Kit drawing in PDF format. PTK-XX is used in conjunction with the Power Distribution harness in XX cm length. Splice the buss wherever a drop needs to be made for a Conveylinx, IQZonz, or EZ24 module.

2D Drawing

Part Number: PDU 90
Description: PulseRoller's Pulse Diverter Unit 90 Degree component for material handling systems. Drawing in DWG format.

2D Drawing

Part Number: PDU 90
Description: PulseRoller's Pulse Diverter Unit 90 Degree component for material handling systems. Drawing in PDF format.

Installation Guide

Description: This document provides all necessary information and steps to properly install the Pulse Diverter Unit (PDU-90)

PDU90 Template

Description: Filling this sheet out enbables our engineering team to properly draw and design the Pulse Divert Unit specific to your application for the quoting and approval process. This must be filled out prior to recieving a quote.

ERSC 3D Model

Part Number: ERSC
Description: The Conveylinx Module in STEP format. ConveyLinx is the PulseRoller advanced high end networked Motor Drive controller which provides many innovative features for Zero Pressure Accumulation or ANY application utilizing low voltage brushless DC motors

ERSC CAD Drawing

Part Number: ERSC
Description: The Conveylinx Module drawing in DWG format. ConveyLinx is the PulseRoller advanced high end networked Motor Drive controller which provides many innovative features for Zero Pressure Accumulation or ANY application utilizing low voltage brushless DC motors.

ERSC PDF Drawing

Part Number: ERSC
Description: The Conveylinx Module drawing in PDF format. ConveyLinx is the PulseRoller advanced high end networked Motor Drive controller which provides many innovative features for Zero Pressure Accumulation or ANY application utilizing low voltage brushless DC motors.

ERSC-HTF 3D Model

Part Number: ERSC-HTF
Description: The Conveylinx ERSC-HTF Module drawing in STEP format.

ERSC-HTF CAD Drawing

Part Number: ERSC-HTF
Description: The Conveylinx ERSC-HTF Module drawing in DWG format.

ERSC-HTF PDF Drawing

Part Number: ERSC-HTF
Description: The Conveylinx ERSC-HTF Module drawing in PDF format.

3D Model

Part Number: BRKT-UNIV
Description: Conveylinx ERSC Mounting Bracket in STEP format. This bracket also fits IQZonz Modules. Can be mounted within the conveyor frame or below. Painted Steel

CAD Drawing

Part Number: BRKT-UNIV
Description: Conveylinx ERSC Mounting Bracket in DWG format. This bracket also fits IQZonz Modules. Can be mounted within the conveyor frame or below. Painted Steel

PDF Drawing

Part Number: BRKT-UNIV
Description: Description: This drawing shows the Conveylinx ERSC Mounting Bracket in PDF format. This bracket also fits IQZonz Modules. Can be mounted within the conveyor frame or below. Painted Steel

3D Model

Part Number: ERSC-SE
Description: The Conveylinx ERSC-SE Breakout Module in STEP format. SE Module provides convenient terminal access to ERSC Control/Sensor Ports

CAD Drawing

Part Number: ERSC-SE
Description: The Conveylinx ERSC-SE Breakout Module drawing in DWG format. SE Module provides convenient terminal access to ERSC Control/Sensor Ports

PDF Drawing

Part Number: ERSC-SE
Description: The Conveylinx ERSC-SE Breakout Module drawing in PDF format. SE Module provides convenient terminal access to ERSC Control/Sensor Ports

Connecting ConveyLinx To Rockwell

Publication Number: ERSC-1520
Title and Version: Connecting to Rockwell PLCs V3.0
Description: This manual is intended for users who need advanced knowledge of connecting a ConveyLinx module to an Allen Bradley CompactLogix or ControlLogix.

Connecting ConveyLinx To Siemens

Publication Number: ERSC-1525
Title and Version: Connecting to Siemens S7-300 PLCs V1.0
Description: This manual is intended for users who need advanced knowledge of connecting a ConveyLinx module to an Siemens S7 PLC.

ConveyMerge Guide

Publication Number: ERSC-1020
Title and Version: ConveyMerge Users Guide V1.1
Description: This manual is intended for users who need basic product information and simple application procedures to implement ConveyMerge in conjuction with ConveyLinx ERSC modules to control merge conveyor.

Developers Guide

Publication Number: ERSC-1500
Title and Version: Conveylinx Developers Guide V5.1
Description: This manual is intended for users who need to utilize a PLC or PC to connect to ConveyLinx Ethernet network to access module status and control conveyor operation. You should have an intermediate to advanced level of understanding of PLC logic and network structures. Familiarity with Ethernet I/P and Modbus TCP protocols is also essential.

Dual Motor Zones Setup

Publication Number: ERSC-1700
Title and Version: ERSC_1700 Settup Up Dual Motor Zones 1.0
Description: Use this document to help configure and setup the proper way of controlling dual motors in a single zone.

ODVA - Declaration of Conformity

Publication Number: File Number: 11390.01
Title and Version: ODVA Declaration of Conformity
Description: ODVA Declaration of Conformity for all ConveyLinx modules utilizing EthernetIP firmware 5.0 and above.

ProfiNet - Declaration of Conformity

Publication Number: Certificate Number: Z11006
Title and Version: PROFIBUS/PROFINET Declaration of Conformity
Description: ODVA Declaration of Conformity for all ConveyLinx modules utilizing EthernetIP firmware 4.1.0 and above.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for ConveyLinx-ERSC, ConveyLinx-HTF, and ZoneMax.

Specifications

Publication Number: ERSC-1050
Title and Version: ConveyLinx-ERSC Technical Specification V1.8
Description: This is the technical specification for the ConveyLinx-ERSC module.

Users Guide

Publication Number: ERSC-1000
Title and Version: Conveylinx Users Guide V4.8
Description: This manual is intended for users who need basic product information and simple application procedures to implement ConveyLinx ERSC modules to control simple linear conveyor.

3D Model

Part Number: ConveyLinx-Ai2
Description: The Conveylinx-Ai2 Module in STEP format. ConveyLinx is the PulseRoller advanced high end networked Motor Drive controller which provides many innovative features for Zero Pressure Accumulation or ANY application utilizing Pulseroller Ai technology brushless DC motors.

CAD Drawing

Part Number: ConveyLinx-Ai2
Description: The Conveylinx-Ai2 Module CAD drawing. ConveyLinx is the PulseRoller advanced high end networked Motor Drive controller which provides many innovative features for Zero Pressure Accumulation or ANY application utilizing Pulseroller Ai technology brushless DC motors.

3D Model

Part Number: IOX-2
Description: IOX-2 Module STEP Model. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

CAD Drawing

Part Number: IOX-2
Description: IOX02 Breakout Module CAD Drawing. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

PDF Drawing

Part Number: IOX-2
Description: IOX-2 Module PDF Drawing. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

PDF Drawing

Part Number: ConveyLinx-Ai2
Description: The Conveylinx-Ai2 Module PDF drawing. ConveyLinx is the PulseRoller advanced high end networked Motor Drive controller which provides many innovative features for Zero Pressure Accumulation or ANY application utilizing Pulseroller Ai technology brushless DC motors.

Connecting ConveyLinx To Rockwell

Publication Number: ERSC-1521
Title and Version: Connecting ConveyLinx Ai2 to Rockwell PLCs V1.1
Description: This manual is intended for users who need advanced knowledge of connecting a ConveyLinx module to an Allen Bradley CompactLogix or ControlLogix.

Connecting ConveyLinx To Siemens

ConveyMerge Manual

Publication Number: ERSC-1020
Title and Version: Conveylinx Guide for ConveyMerge V1.1
Description: This manual is intended for users who need basic information on how to configure and use ConveyMerge within EasyRoll.

Developers Guide

Publication Number: ERSC-1506
Title and Version: Conveylinx Ai Developers Guide V1.1
Description: This manual is intended for users who need to utilize a PLC or PC to connect to ConveyLinx Ethernet network to access module status and control conveyor operation. You should have an intermediate to advanced level of understanding of PLC logic and network structures. Familiarity with Ethernet I/P and Modbus TCP protocols is also essential.

Dual Motor Zones Setup

ODVA - Declaration of Conformity

ProfiNet - Declaration of Conformity

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for ConveyLinx-Ai2, ConveyLinx-IO, MotionLinx-Ai, MotionLinx-IO and EQube-Ai.

Specifications

Publication Number: ERSC-1070
Title and Version: ConveyLinx Technical Specification V1.0
Description: This is the technical specification for the ConveyLinx Ai2 family of controllers.

Users Guide

Publication Number: ERSC-1006
Title and Version: Conveylinx Ai2 Users Guide V1.5
Description: This manual is intended for users who need basic product information and simple application procedures to implement ConveyLinx Ai2 modules to control simple linear conveyor.

3D Model

Part Number: ConveyLinx IO
Description: The Conveylinx IO Module drawing in STEP format. ConveyLinx IO is the PulseRoller advanced high end networked IO card which works in conjunction with ConveyLinx Ai

CAD Drawing

Part Number: ConveyLinx IO
Description: The Conveylinx IO Module drawing in DWG format. ConveyLinx IO is the PulseRoller advanced high end networked IO card which works in conjunction with ConveyLinx Ai

3D Model

Part Number: IOX-2
Description: IOX-2 Module STEP Model. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

CAD Drawing

Part Number: IOX-2
Description: IOX02 Breakout Module CAD Drawing. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

PDF Drawing

Part Number: IOX-2
Description: IOX-2 Module PDF Drawing. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

PDF Drawing

Part Number: ConveyLinx IO
Description: The Conveylinx IO Module drawing in PDF format. ConveyLinx IO is the PulseRoller advanced high end networked IO card which works in conjunction with ConveyLinx Ai

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for ConveyLinx-Ai2, ConveyLinx-IO, MotionLinx-Ai, MotionLinx-IO and EQube-Ai.

Users Guide

Publication Number: ERSCIO-1008
Title and Version: Conveylinx IO Users Guide V1.1
Description: This manual is intended for users who need basic product information and simple application procedures to implement ConveyLinx IO modules to control IO onboard MDR Conveyor.

3D Model

Part Number: CNIP
Description: The ConveyNet I/P module as a 3D model in STEP format

CAD Drawing

Part Number: CNIP
Description: The ConvevNet I/P module drawing in DWG format

PDF Drawing

Part Number: CNIP
Description: The ConveyNet I/P module drawing in PDF format

ODVA - Declaration of Conformity

ProfiNet - Declaration of Conformity

Users Guide

Publication Number: CNIP-1000
Title and Version: ConveyNet IP User's Guide V1.4
Description: This manual is intended for users who need basic product information and simple application procedures to implement ConveyNet IP modules to perform simple remote I/O and RS-485 Modbus RTU device control via PLC capable of either Modbus TCP,Ethernet I/P, or Profinet I/O protocols.

3D Model

Part Number: EQube
Description: The EQube module 3D Model in STEP format

CAD Drawing

Part Number: EQUBE
Description: The EQube Drawing in DWG format. EQube is an economical single motor, drive controller module for Senergy Motors. EQube provides control for the motor in ECO mode.

PDF Drawing

Part Number: EQUBE
Description: The EQUBE Drawing. EQube is an economical single motor, drive controller module for Senergy Motors. EQube provides control for the motor in ECO mode.

E-Qube User Manual

Title and Version: E-Qube User Manual V2.0
Description: This manual is intended for users who need basic product information and simple application procedures to implement E-Qube modules with PulseRoller.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for E-Qube.

3D Model

Part Number: EQUBE Ai
Description: The EQUBE-Ai Drawing in STEP format. EQube is an economical single motor, drive controller module for Senergy Motors. EQube provides control for the motor in ECO mode.

CAD Drawing

Part Number: EQUBE Ai
Description: The EQUBE-Ai Drawing in DWG format. EQube is an economical single motor, drive controller module for Senergy Motors. EQube provides control for the motor in ECO mode.

PDF Drawing

Part Number: EQUBE Ai
Description: The EQUBE-Ai Drawing in PDF format. EQube is an economical single motor, drive controller module for Senergy Motors. EQube provides control for the motor in ECO mode.

E-Qube User Manual

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for ConveyLinx-Ai2, ConveyLinx-IO, MotionLinx-Ai, MotionLinx-IO and EQube-Ai.

3D Model

Part Number: EZ24, EZ24HTB, EZ24HTBs
Description: The EZ24 Family module drawing in STEP format. EZ24 is an economical single motor, drive controller module for PulseRoller Motors.

CAD Drawing

Part Number: EZ24, EZ24HTB, EZ24HTBs
Description: The EZ24 Family module drawing in DWG format. EZ24 is an economical single motor, drive controller module for PulseRoller Motors.

PDF Drawing

Part Number: EZ24, EZ24HTB, EZ24HTBs
Description: The EZ24 Family module drawing in PDF format. EZ24 is an economical single motor, drive controller module for PulseRoller Motors.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for EZ-24.

Specification

Publication Number: PR-1101
Title and Version: EZ24 Family Technical Specification V1.1
Description: This is the technical specification for the EZ24 family of controllers.

Users Guide

Publication Number: PR-1500
Title and Version: EZ24 Family Reference Manual V11.7
Description: This manual is intended for users who need basic product information and simple application procedures to implement EZ-24 modules to control a Motorized Drive Roller

3D Model

Part Number: EZQUBE
Description: The EZQUBE module drawing in STEP format. EZQube is an economical single motor, drive controller module for Senergy Motors.

CAD Drawing

Part Number: EZQUBE
Description: The EZQUBE module drawing in DWG format. EZQube is an economical single motor, drive controller module for Senergy Motors.

PDF Drawing

Part Number: EZQUBE
Description: The EZQUBE module drawing in PDF format. EZQube is an economical single motor, drive controller module for Senergy Motors.

EZ-Qube User Manual

Title and Version: EZ-Qube User Manual V2.0 issued 19-May-2021
Description: This manual is intended for users who need basic product information and simple application procedures to implement EZ-Qube modules with PulseRollers.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for EZ-Qube.

3D Model

Part Number: IQMAP
Description: IQZonz Map module in STEP format. IQMap is used in conjunction with our latest Mid-Level Zero Pressure solution called IQZonz.

CAD Drawing

Part Number: IQMAP
Description: IQZonz Map module in DWG format. IQMap is used in conjunction with our latest Mid-Level Zero Pressure solution called IQZonz.

PDF Drawing

Part Number: IQMAP
Description: IQZonz Map module in PDF format. IQMap is used in conjunction with our latest Mid-Level Zero Pressure solution called IQZonz.

3D Model

Part Number: IQZONZ
Description: IQZonz module in STEP format. IQZonz is a mid-range controller designed to quickly commission a standard Zero Pressure Accumulation conveyor without any software.

CAD Drawing

Part Number: IQZONZ
Description: IQZonz module in DWG format. IQZonz is a mid-range controller designed to quickly commission a standard Zero Pressure Accumulation conveyor without any software.

3D Model

Part Number: BRKT-UNIV
Description: Conveylinx ERSC Mounting Bracket in STEP format. This bracket also fits IQZonz Modules. Can be mounted within the conveyor frame or below. Painted Steel

CAD Drawing

Part Number: BRKT-UNIV
Description: Conveylinx ERSC Mounting Bracket in DWG format. This bracket also fits IQZonz Modules. Can be mounted within the conveyor frame or below. Painted Steel

PDF Drawing

Part Number: IQZONZ
Description: IQZonz module in PDF format. IQZonz is a mid-range controller designed to quickly commission a standard Zero Pressure Accumulation conveyor without any software.

Quick Start Guide

Publication Number: IQ-1000
Title and Version: IQZonz/IQZonz-Ai/IQMap Quick Start Guide V1.1
Description: This Quick Start guide is intended for users who need basic product information and simple application procedures to implement IQZonz modules to control simple linear conveyor.

Reference Manual

Publication Number: IQ-1100
Title and Version: IQZonz/IQZonz-Ai/IQMap Reference Manual V1.2
Description: This manual is intended for users who need all information for the IQZonz and IQMap product information. Items such as pin outs, electrical and enviormental, simple application procedures to implement IQZonz modules to control simple linear conveyor and much more..

3D Model

Part Number: MotionLinx Ai
Description: The MotionLinx Module drawing in STEP format. MotionLinx Ai is PulseRoller latest advanced high end EtherCat card which works to control IO and low voltage motorized driven roller.

CAD Drawing

Part Number: MotionLinx Ai
Description: The MotionLinx Module drawing in DWG format. MotionLinx Ai is PulseRoller latest advanced high end EtherCat card which works to control IO and low voltage motorized driven roller.

3D Model

Part Number: IOX-2
Description: IOX-2 Module STEP Model. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

CAD Drawing

Part Number: IOX-2
Description: IOX02 Breakout Module CAD Drawing. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

PDF Drawing

Part Number: IOX-2
Description: IOX-2 Module PDF Drawing. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

PDF Drawing

Part Number: MotionLinx Ai
Description: The MotionLinx Module drawing in PDF format. MotionLinx Ai is PulseRoller latest advanced high end EtherCat card which works to control IO and low voltage motorized driven roller.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for ConveyLinx-Ai2, ConveyLinx-IO, MotionLinx-Ai, MotionLinx-IO and EQube-Ai.

Specifications

Publication Number: MRSC-1050
Title and Version: MotionLinx Ai Specification V1.0
Description: This is the technical specification for the MotionLinx Family of Controllers..

Users Guide

Publication Number: ML-1000
Title and Version: MotionLinx Ai Users Guide V1.6
Description: This is the technical Users guide for the MotionLinx Family of Controllers..

3D Model

PPart Number: MotionLinx IO
Description: The MotionLinx-IO Module drawing in STEP format. MotionLinx IO is an EtherCAT IO module that works in conjunction with MotionLinx-Ai.

CAD Drawing

Part Number: MotionLinx IO
Description: The MotionLinx-IO Module drawing in DWG format. MotionLinx IO is an EtherCAT IO module that works in conjunction with MotionLinx-Ai.

3D Model

Part Number: IOX-2
Description: IOX-2 Module STEP Model. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

CAD Drawing

Part Number: IOX-2
Description: IOX02 Breakout Module CAD Drawing. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

PDF Drawing

Part Number: IOX-2
Description: IOX-2 Module PDF Drawing. A Breakout/Splitter module that provides field wireable and/or M8 connections access to a given ConveyLinx Ai2 module Sensor Port.

PDF Drawing

Part Number: MotionLinx IO
Description: The MotionLinx-IO Module drawing in PDF format. MotionLinx IO is an EtherCAT IO module that works in conjunction with MotionLinx-Ai.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for ConveyLinx-Ai2, ConveyLinx-IO, MotionLinx-Ai, MotionLinx-IO and EQube-Ai.

User Guide

Publication Number: ML-1500
Title and Version: MotionLinx IO Users Guide V1.1
Description: This is the technical Users guide for the MotionLinx Family of Controllers..

2,3-Stage PGD with Micro-V

Part Number: PGD024-SE1-(2,3-Stage)
Description: PulseRoller Geared Drive, 2 & 3 Stage Gearbox with PGD-06-001 Micro-V Kit installed. Drawing in DWG format.

2,3-Stage PGD with Micro-V

Part Number: PGD024-SE1-(2,3-Stage) w/ Micro-V Kit
Description: PulseRoller Geared Drive, 2 & 3 Stage Gearbox with PGD-06-001 Micro-V Kit installed. Drawing in PDF format.

2,3-Stage PGD

Part Number: PGD024-SE1-(2,3-Stage)
Description: PulseRoller Geared Drive, 2 & 3 Stage Gearbox drawing in DWG format.

2,3-Stage PGD

Part Number: PGD024-SE1-(2,3-Stage)
Description: PulseRoller Geared Drive, 2 & 3 Stage Gearbox drawing in PDF format.

3D 2-Stage PGD STEP

Part Number: PGD024-SE1-(2-Stage)
Description: PulseRoller Geared Drive 2 Stage Gearbox version 3D model in STEP format

3D 3-Stage PGD STEP

Part Number: PGD024-SE1-(3-Stage)
Description: PulseRoller Geared Drive 3 Stage Gearbox version 3D model in STEP format.

PGD-06-001 STEP

Part Number: PGD-006-001
Description: PulseRoller Micro-V Accessory model in STEP format. Kit designed to attach to the Pulse Geared Drive (PGD0024-SE1).

PGD-06-001

Part Number: PGD-006-001
Description: PulseRoller Micro-V Accessory Kit drawing in DWG format. Kit is designed to attach to the Pulse Geared Drive (PGD0024-SE1).

PGD-06-001

Part Number: PGD-006-001
Description: PulseRoller Micro-V Accessory Kit Drawing in PDF format. Kit is designed to attach to the Pulse Geared Drive (PGD0024-SE1).

Accessories

Description: This document provides information on standard accessory attachments for a PulseRoller Geared Drive.

General Information

Description: This document provides the technical, size, speed, and torque data for the Senergy Pulse Geared Drive.

Installation Guide

Description: This document provides all necessary information and steps to properly install a PulseRoller Geared Drive.

Part Number Definition

Description: This document will give you the necessary information to allow you to build your own Senergy Pulse Gear Drive part number for ordering.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for all Senergy and Senergy-Ai motor units.

Selecting Power Supply

Description: This document will help you in selecting the right power supply for your project using PulseRoller's.

2,3-Stage PGD

Part Number: PGD024-SE2-(2,3-Stage)
Description: PulseRoller Geared Drive, 2 & 3 Stage Gearbox drawing in DWG format.

2,3-Stage PGD

Part Number: PGD024-SE2-(2,3-Stage)
Description: PulseRoller Geared Drive, 2 & 3 Stage Gearbox drawing in PDF format.

3D 2-Stage PGD STEP

Part Number: PGD024-SE2-(2-Stage)
Description: PulseRoller Geared Drive 2 Stage Gearbox version 3D model in STEP format

3D 3-Stage PGD STEP

Part Number: PGD024-SE2-(3-Stage)
Description: PulseRoller Geared Drive 3 Stage Gearbox version 3D model in STEP format.

PGD-06-001 STEP

Part Number: PGD-006-001
Description: PulseRoller Micro-V Accessory model in STEP format. Kit designed to attach to the Pulse Geared Drive (PGD0024-SE2).

PGD-06-001

Part Number: PGD-006-001
Description: PulseRoller Micro-V Accessory Kit drawing in DWG format. Kit is designed to attach to the Pulse Geared Drive (PGD0024-SE2).

PGD-06-001

Part Number: PGD-006-001
Description: PulseRoller Micro-V Accessory Kit Drawing in PDF format. Kit is designed to attach to the Pulse Geared Drive (PGD0024-SE2).

Accessories

Description: This document provides information on standard accessory attachments for a PulseRoller Geared Drive.

General Information

Description: This document provides the technical, size, speed, and torque data for the Senergy Pulse Geared Drive.

Installation Guide

Description: This document provides all necessary information and steps to properly install a PulseRoller Geared Drive.

Part Number Definition

Description: This document will give you the necessary information to allow you to build your own Senergy Pulse Gear Drive part number for ordering.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for all Senergy and Senergy-Ai motor units.

Selecting Power supply

Part Number: Pulse Geared Drive
Description: This document will help you in selecting the right power supply for your project using PulseRoller's.

Wash Down Rated

Description: This document provides information on the standard Wash Down Rated PulseRoller Geared Drive.

63-5 Dia Dual Sprocket

Part Number: PR-PD-63-XXX-XXASDQ
Description: PulseRoller 63.5 Dia, Dual Sprocket, drawing in DWG format.

63-5 Dia Dual Sprocket

Part Number: PR-PD-63-XXX-XXASDQ
Description: PulseRoller 63.5 Dia, Dual Sprocket, drawing in PDF format.

63-5 Dia Plain Straight

Part Number: PR-PD-63-XXX-XXASAQ
Description: PulseRoller 63.5 Dia, Plain Straight, drawing in DWG format.

63-5 Dia Plain Straight

Part Number: PR-PD-63-XXX-XXASAQ
Description: PulseRoller 63.5 Dia, Plain Straight, drawing in PDF format.

Characteristics

Description: This document will provide you with the speed codes and torque perfromance data for the Senergy Pallet Motor Roller.

General Information

Description: This document will provide you with all general information for the Pallet Roller's such as Technical Data, Wall Thickness, Static Load Capacity, Avalaible minimum lengths, Dimensions, and Characteristics data.

Installation Caution

Description: This document provides installation notes for tightening torque for the Senergy Pallet Motor Roller.

Part Number Definition

Description: This document will give you the necessary information to allow you to build your own PulseRoller Pallet Motor Roller part number for ordering.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for all Senergy and Senergy-Ai motor units.

Selecting Power Supply

Description: This document will help you in selecting the right power supply for your project using PulseRoller's.

2D Drawing

Part Number: PMD Ai Drawings
Description: PulseRoller's Pulse Motion Drive drawing in DWG format. PMD was designed for those applications that require Senergy's awesome power, efficiency and reliability in an extremely compact form for actuating devices while still delivering the outstanding features of PulseRoller controls capabilities.

2D Drawing

Part Number: PMD Ai Drawings
Description: PulseRoller's Pulse Motion Drive drawing in PDF format. PMD was designed for those applications that require Senergy's awesome power, efficiency and reliability in an extremely compact form for actuating devices while still delivering the outstanding features of PulseRoller controls capabilities.

3D Drawing

Part Number: PMD Ai 3D Drawings
Description: PulseRoller's Pulse Motion Drive 3D model in STEP format. PMD was designed for those applications that require Senergy's awesome power, efficiency and reliability in an extremely compact form for actuating devices while still delivering the outstanding features of PulseRoller controls capabilities.

General Information

Description: This document will provide you with all general information for the Pulse Motion Drive such as Technical Data, Static Load Capacity and Dimensions.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for all Senergy and Senergy-Ai motor units.

Bracket Short Flat Up STEP

Part Number: PR-D-30H-FU-N-ST
Description: Senergy Motor Roller Bracket Short Flat Up 3D Model in STEP format.

Bracket Short Flat Up

Part Number: PR-D-30H-FU-N-ST
Description: Senergy Motor Roller Bracket Short Flat Up drawing in DWG format.

Bracket Short Flat Up

Part Number: PR-D-30H-FU-N-ST
Description: Senergy Motor Roller Bracket Short Flat Up drawing in PDF format.

Bracket Short Point Up STEP

Part Number: PR-D-30H-PU-ST
Description: Senergy Motor Roller Bracket Short Point Up 3D Model in STEP format.

Bracket Short Point Up

Part Number: PR-D-30H-PU-N-ST
Description: Senergy Motor Roller Bracket Short Point Up drawing in DWG format.

Bracket Short Point Up

Part Number: PR-D-30H-PU-ST
Description: Senergy Motor Roller Bracket Short Bracket Point Up drawing in PDF format.

Bracket Standard Flat Up STEP

Part Number: PR-D-30H-FU-N
Description: Senergy Motor Roller Bracket Standard Flat Up 3D Model in STEP format.

Bracket Standard Flat Up

Part Number: PR-D-30H-FU-N
Description: Senergy Motor Roller Bracket Standard Flat Up drawing in DWG format.

Bracket Standard Flat Up

Part Number: PR-D-30H-FU-N
Description: Senergy Motor Roller Bracket Standard Flat Up in PDF format.

Bracket Standard Point Up STEP

Part Number: PR-D-30H-PU-N
Description: Senergy Motor Roller Bracket Standard Point Up 3D Model in STEP format.

Bracket Standard Point Up

Part Number: PR-D-30H-PU-N
Description: Senergy Motor Roller Bracket Standard Point Up drawing in DWG format.

Bracket Standard Point Up

Part Number: PR-D-30H-PU-N
Description: Senergy Motor Roller Bracket Standard Point Up drawing in PDF format.

Non Powered End Bracket Point Up

Part Number: MR-DC-30P
Description: Senergy Motor Roller Bracket Point Up for Non-Powered End drawing in DWG format.

Non Powered End Bracket Point Up

Part Number: MR-DC-30P
Description: Senergy Motor Roller Bracket Point Up for Non-Powered End drawing in PDF format.

3D Senergy

Part Number: Senergy Series Motor Roller
Description: 3D Model of Senergy Motor Roller in EASM format. The Senergy? unique gearbox design and powerful brushless DC motor provides an extremely efficient means of delivering an amazing amount of torque and speed with the smallest amount of energy.

Dual Grooves 1-9 Inch

Part Number: PR-AD-48-XXX-XXZSGQ
Description: Senergy Motor Roller Dual Groove 1.9" drawing in DWG format.

Dual Grooves 1-9 Inch

Part Number: PR-AD-48-XXX-XXZSGQ
Description: Senergy Motor Roller Dual Groove 1.9" drawing in PDF format.

Micro V-Pulley 1-9 Inch

Part Number: PR-AD-48-XXX-XXZSHQ
Description: Senergy Motor Roller Micro V 1.9" drawing in DWG format.

Micro V-Pulley 1-9 Inch

Part Number: PR-AD-48-XXX-XXZSHQ
Description: Senergy Motor Roller Micro V 1.9" drawing in PDF format.

No Grooves 1-9 Inch

Part Number: PR-AD-48-XXX-XXZSAQ
Description: Senergy Motor Roller No Groove 1.9" drawing in DWG format.

No Grooves 1-9 Inch

Part Number: PR-AD-48-XXX-XXZSAQ
Description: Senergy Motor Roller No Groove 1.9" drawing in PDF format.

Round Groove Pulley 1-9 Inch

Part Number: PR-AD-48-XXX-XXZSFQ
Description: Senergy Motor Roller Round Groove Pulley drawing in DWG format.

Round Groove Pulley 1-9 Inch

Part Number: PR-AD-48-XXX-XXZSFQ
Description: Senergy Motor Roller Round Groove Pulley drawing in PDF format.

Bracket Information

Description: This document will give you the necessary information for all the standard options for Senergy Roller fixing brackets.

Characteristics

Description: This document will provide you with all the characteristic data for the Senergy Motor Roller including Speed Codes, torque, tangential force, and performance charts.

Dimensions

Description: This document provides Senergy Roller dimensional information for straight, dual groove, micro-V hub and round groove pulley options.

General Information

Description: This document will provide you with Senergy Roller general information for the Senergy Roller such as electrical data, load capacity, minimum roller length, etc.

Installation Guide

Description: This document provides all necessary information and steps to properly install a PulseRoller motor roller.

Options

Description: This document will provide you with all the available Senergy Roller standard options.

Part Number Definition

Description: This document will give you the necessary information to allow you to build your own PulseRoller Senergy Motor Roller part number for ordering.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for all Senergy and Senergy-Ai motor units.

Selecting Power Supply

Description: This document will help you in selecting the right power supply for your project using PulseRoller's.

Bracket Short Flat Up STEP

Part Number: PR-D-30H-FU-N-ST
Description: Senergy Motor Roller Bracket Short Flat Up 3D Model in STEP format.

Bracket Short Flat Up

Part Number: PR-D-30H-FU-N-ST
Description: Senergy Motor Roller Bracket Short Flat Up drawing in DWG format.

Bracket Short Flat Up

Part Number: PR-D-30H-FU-N-ST
Description: Senergy Motor Roller Bracket Short Flat Up drawing in PDF format.

Bracket Short Point Up STEP

Part Number: PR-D-30H-PU-ST
Description: Senergy Motor Roller Bracket Short Point Up 3D Model in STEP format.

Bracket Short Point Up

Part Number: PR-D-30H-PU-N-ST
Description: Senergy Motor Roller Bracket Short Point Up drawing in DWG format.

Bracket Short Point Up

Part Number: PR-D-30H-PU-ST
Description: Senergy Motor Roller Bracket Short Bracket Point Up drawing in PDF format.

Bracket Standard Flat Up STEP

Part Number: PR-D-30H-FU-N
Description: Senergy Motor Roller Bracket Standard Flat Up 3D Model in STEP format.

Bracket Standard Flat Up

Part Number: PR-D-30H-FU-N
Description: Senergy Motor Roller Bracket Standard Flat Up drawing in DWG format.

Bracket Standard Flat Up

Part Number: PR-D-30H-FU-N
Description: Senergy Motor Roller Bracket Standard Flat Up in PDF format.

Bracket Standard Point Up STEP

Part Number: PR-D-30H-PU-N
Description: Senergy Motor Roller Bracket Standard Point Up 3D Model in STEP format.

Bracket Standard Point Up

Part Number: PR-D-30H-PU-N
Description: Senergy Motor Roller Bracket Standard Point Up drawing in DWG format.

Bracket Standard Point Up

Part Number: PR-D-30H-PU-N
Description: Senergy Motor Roller Bracket Standard Point Up drawing in PDF format.

Non Powered End Bracket Point Up

Part Number: MR-DC-30P
Description: Senergy Motor Roller Bracket Point Up for Non-Powered End drawing in DWG format.

Non Powered End Bracket Point Up

Part Number: MR-DC-30P
Description: Senergy Motor Roller Bracket Point Up for Non-Powered End drawing in PDF format.

Dual Grooves 48mm Spring Loaded Shaft

Part Number: PR-AD-48-XXX-XXZMGQ
Description: Senergy Motor Roller Dual Groove 48mm Roller with a spring loaded hex shaft, Ai Technology. Drawing in DWG format.

Dual Grooves 48mm Spring Loaded Shaft

Part Number: PR-AD-48-XXX-XXZMGQ
Description: Senergy Motor Roller Dual Groove 48mm Roller with a spring loaded hex shaft, Ai Technology. Drawing in PDF format.

No Grooves 48mm Spring Loaded Shaft

Part Number: PR-AD-48-XXX-XXZMAQ
Description: Senergy Motor Roller no grooves 48mm Roller with a Spring Loaded Shaft, Ai Technology. Drawing in DWG format.

No Grooves 48mm Spring Loaded Shaft

Part Number: PR-AD-48-XXX-XXZMAQ
Description: Senergy Motor Roller no grooves 48mm Roller with a Spring Loaded Shaft. Drawing in PDF format.

POLYV 48mm Spring Loaded Shaft

Part Number: PR-AD-48-XXX-XXZMHQ
Description: Senergy Motor Roller POLYV Insert 48mm Roller with a Spring Loaded Shaft, Ai Technology. Drawing in DWG format.

POLYV 48mm Spring Loaded Shaft

Part Number: PR-AD-48-XXX-XXZMHQ
Description: Senergy Motor Roller POLYV Insert 48mm Roller with a Spring Loaded Shaft , Ai Technology. Drawing in PDF format.

Round Groove Pulley 48mm Spring Loaded Shaft

Part Number: PR-AD-48-XXX-XXZMFQ
Description: Senergy Motor Roller Round Groove Pulley 48mm Roller with a Spring Loaded Shaft, Ai Technology. Drawing in DWG format.

Round Groove Pulley 48mm Spring Loaded Shaft

Part Number: PR-AD-48-XXX-XXZMFQ
Description: Senergy Motor Roller Round Groove Pulley 48mm Roller with a Spring Loaded Shaft , Ai Technology. Drawing in PDF format.

Bracket Information

Description: This document will give you the necessary information for all the standard options for Senergy Roller fixing brackets.

Characteristics

Description: This document will provide you with all the characteristic data for the Senergy Motor Roller including Speed Codes, torque, tangential force, and performance charts.

Dimensions

Description: This document provides Senergy Roller dimensional information for straight, dual groove, micro-V hub and round groove pulley options.

General Information

Description: This document will provide you with Senergy Roller general information for the Senergy Roller such as electrical data, load capacity, minimum roller length, etc.

Installation Guide

Description: This document provides all necessary information and steps to properly install a PulseRoller Senergy Motor Roller.

Options

Description: This document will provide you with all the available Senergy Roller standard options.

Part Number Definition

Description: This document will give you the necessary information to allow you to build your own PulseRoller Senergy Motor Roller part number for ordering.

RoHS Declaration of Conformity

Specification: Directive 2015/863/EU (RoHS 3)
Description: Declaration of Conformity for RoHS 3 for all Senergy and Senergy-Ai motor units.

Selecting Power Supply

Description: This document will help you in selecting the right power supply for your project using PulseRoller's.

Brochure

Senegy | Control | Accessories
This document provides you with most of the offering provided by PulseRoller brand. Senergy Part Number Definition and Speed and Torque chart is also included.

Global PulseRoller

PULSEROLLER - GLOBAL MOTOR ROLLER TECHNOLOGIES
Dated: June 10th 2014
PulseRoller has successfully entered the EU market with the most innovative selection of low voltage 24VDC motor rollers and controls ever seen in the materials handling industry.

Motorized Roller Primer

Brushless DC Motor Primer
Written and Given Permission by Muhammad Mubeen
This primer on brushless DC motors has been written for the benefit of senior management executives of OEM companies in whose products, the electric motor is a major cost and feature component.

Price Increase Announcement 04-30-2021

Price Increase Announcement
April 30th 2021
The enclosed is a letter sent to all customers notifying of two upcoming price increases.

PulseRoller Catalog

PulseRoller Catalog - Drives, Rollers and Controls
This document provides you with most of the offering provided by PulseRoller brand. PulseRoller specifications, characteristics, part number information and much much more!
Revision: 30-NOV-2020

Terms and Conditions

PULSEROLLER T&C's - Terms and Conditions
This document provides you with the most current version of our Terms and Conditions
Revision: V 1.6 1/21/2020

Training Brochure

ConveyLinx Training Brochure
This document will provide you with a detailed understanding of our ConveyLinx Training classes which are offered at no additional cost at Insight Automation.

ConveyLinx 4 27

Title: Conveylinx Firmware (Legacy)
Version: V4.27
Description: Backward compatible version for legacy PLC connections.

ConveyLinx 5 7

Title: ODVA Certified Conveylinx Firmware
Version: V5.07
Description: ODVA Certified firmware version for ConveyLinx Family. ::::Do not upgrade to this version if ConveyLinx needs to communicate with existing Ethernet I/P PLC programs that have non-ODVA standard instances::::

ConveyLinxAI 4 9

Title: Conveylinx AI Firmware
Version: V4.9
Description: This download is for ConveyLinx AI and the firmware must be downloaded using the EasyRoll Tool.

ConveyLinx 3 45

Title: Conveylinx Firmware
Version: V3.45
Description: This downloads is ConveyLinx and ConveyNetip firmware which must be downloaded using the EasyRoll Tool.

ConveyLinx 4 01

Title: Conveylinx Firmware
Version: V4.1
Description: This downloads is ConveyLinx and ConveyNetip firmware which must be downloaded using the EasyRoll Tool.

ConveyLinx 4 02

Title: Conveylinx Firmware
Version: V4.2
Description: This downloads is ConveyLinx and ConveyNetip firmware which must be downloaded using the EasyRoll Tool.

ConveyLinx 4 03

Title: Conveylinx Firmware
Version: V4.3
Description: This downloads is ConveyLinx and ConveyNetip firmware which must be downloaded using the EasyRoll Tool.

ConveyLinx 4 11

Title: Conveylinx Firmware
Version: V4.11
Description: This downloads is ConveyLinx and ConveyNetip firmware which must be downloaded using the EasyRoll Tool.

ConveyLinx 4 14

Title: Conveylinx Firmware
Version: V4.14
Description: This downloads is ConveyLinx and ConveyNetip firmware which must be downloaded using the EasyRoll Tool.

ConveyLinx 4 23

Title: Conveylinx Firmware
Version: V4.23
Description: This downloads is ConveyLinx and ConveyNetip firmware which must be downloaded using the EasyRoll Tool.

ConveyLinx 4 24

Title: Conveylinx Firmware
Version: V4.24
Description: This downloads is ConveyLinx and ConveyNetip firmware which must be downloaded using the EasyRoll Tool.

ConveyLinx 4 25

Title: Conveylinx Firmware
Version: V4.25
Description: This downloads is ConveyLinx and ConveyNetip firmware which must be downloaded using the EasyRoll Tool.

ConveyLinx 5 02

Title: ODVA Certified Conveylinx Firmware
Version: V5.02
Description: This download is ConveyLinx, ConveyLinx IO and ConveyNetip firmware which must be downloaded using the EasyRoll Tool. ::::::::::::::::Please do not upgrade to 5.02 with current PLC programs if the instances haven't been changed to match ODVA standards::::::::::::::

ConveyLinxAI 5 04 05

Title: Conveylinx AI Firmware
Version: V5.04.05
Description: This download is for ConveyLinx AI and the firmware must be downloaded using the EasyRoll Tool.

ConveyLinxAI 4 19

ConveyLinxAI 4 22 3

Title: Conveylinx AI Firmware
Version: V4.22.3
Description: This download is for ConveyLinx AI and the firmware must be downloaded using the EasyRoll Tool.

ConveyLinxAI 5 04 0

Title: Conveylinx AI Firmware
Version: V5.04
Description: This download is for ConveyLinx AI and the firmware must be downloaded using the EasyRoll Tool.

ConveyLinxAI 5 04 0

Title: Conveylinx AI Firmware
Version: V5.04
Description: This download is for ConveyLinx AI and the firmware must be downloaded using the EasyRoll Tool.

ConveyLinxAI 4 19

ConveyLinxAI 4 22 3

Title: Conveylinx AI Firmware
Version: V4.22.3
Description: This download is for ConveyLinx AI and the firmware must be downloaded using the EasyRoll Tool.

IQ 1 09

IQ 1 6

Title: LATEST IQZonz Firmware
Version: V1.6
Description: This download is for the IQzonz standard ZPA controller. IQTool Software must be used to download the latest firmware into the module.

IQ 1 7

Title: LATEST IQZonz Firmware
Version: V1.7
Description: This download is for the IQzonz standard ZPA controller. IQTool Software must be used to download the latest firmware into the module.

IQ 1 8

Title: LATEST IQZonz Firmware
Version: V1.8
Description: This download is for the IQzonz standard ZPA controller. IQTool Software must be used to download the latest firmware into the module.

MotionLinx 1 8

Title: MotionLinx AI Firmware
Version: V1.8
Description: This download is for MotionLinx AI firmware.

MotionLinx 1 6

Title: MotionLinx AI Firmware
Version: V4.19
Description: This download is for MotionLinx AI and the firmware must be downloaded using the EasyRoll Tool.

MotionLinx 1 8

Title: MotionLinx AI Firmware
Version: V1.8
Description: This download is for MotionLinx AI firmware.

MotionLinx 1 6

Title: MotionLinx IO Firmware
Version: V4.19
Description: This download is for MotionLinx IO and the firmware must be downloaded using the EasyRoll Tool.

ESI

Title: EtherCat Implementation Sheet
Version: V1.8
Description: This download is the MotionLinx AI ESI file to be imported to EtherCat Master PLC's for I/O connection.

ESI

Title: EtherCat Implementation Sheet
Version: V1.0
Description: This download is for MotionLinx IO files to be imported to EtherCat Master PLC's for I/O connection.

ERSC Family FW 4 27 & 5 07

Title: Conveylinx Ethernet I/P EDS & AOI Files
Version: V4.25/5.07
Description: Ethernet I/P EDS and AOI files for ConveyLinx modules running FW 4.27 and 5.07

EDS & AOI V4 24 & Older

Title: Conveylinx Ethernet I/P EDS & AOI Files
Version: V4.24
Description: Ethernet I/P EDS and AOI files for ConveyLinx modules running FW 4.24 and older

EDS & AOI V4 25 & V5 02

Title: Conveylinx Ethernet I/P EDS & AOI Files
Version: V4.25/5.02
Description: Ethernet I/P EDS and AOI files for ConveyLinx modules running FW 4.25 and 5.02

EDS & AOI V5 04

Title: Conveylinx Allen Bradley Files
Version: V5.04
Description: This download is for ConveyLinx files to be imported to Allen Bradley Logix PLC's and RSLinx for I/O connection.

EDS & AOI V5 04

Title: Conveylinx Allen Bradley Files
Version: V5.04
Description: This download is for ConveyLinx files to be imported to Allen Bradley Logix PLC's and RSLinx for I/O connection.

GSDML FW4 25 5 02

Title: Conveylinx-Ai Family GSDML File
Version: V2.31 Build 20150411
Description: GSDML file containing all Device Access Point (DAP) definitions for ConveyLinx-ERSC Family modules with Firmware 4.25 / 5.02 for import into your Siemens TIA Portal or STEP 7 environments.

GSDML FW4 27 5 07

Title: Conveylinx-Ai Family GSDML File
Version: V2.33 Build 20210105
Description: GSDML file containing all Device Access Point (DAP) definitions for ConveyLinx-ERSC Family modules with Firmware 4.27 / 5.07 for import into your Siemens TIA Portal or STEP 7 environments.

GSDML

Title: Conveylinx-Ai Family GSDML File
Version: V2.33 Build 20190403
Description: GSDML file containing all Device Access Point (DAP) definitions for ConveyLinx-AiFamily modules for import into your TIA Portal or STEP7 environment.

GSDML

Title: Conveylinx GSDML Files
Version: V2.33 Build 20180606
Description: GSDML file containing all Device Access Point (DAP) definitions for ConveyLinx-IO module to be imported into yout TIA Portal or STEP7 environment.

UDT Step 7

Title: Conveylinx Step 7 Files
Version: V1.0
Description: This download is for ConveyLinx AI files to be imported to Siemens Step 7 PLC's for I/O connection.

UDT Step 7

Title: Conveylinx Ai2 Step 7 Files
Version: V1.0
Description: This download is for ConveyLinx AI files to be imported to Siemens Step 7 PLC's for I/O connection.

UDT Step 7

Title: Conveylinx Ai2 Step 7 Files
Version: V1.0
Description: This download is for ConveyLinx AI files to be imported to Siemens Step 7 PLC's for I/O connection.

UDT TIA Portal

Title: Conveylinx TIA Portal
Version: V2.2 Build 20210518
Description: User Data Type (UDT) file for ConveyLinx-ERSC modules for import into Siemens TIA Portal environment.

UDT TIA Portal

Title: Conveylinx TIA Portal
Version: V1.9 Build 20210518
Description: User Data Type (UDT) file for ConveyLinx-Ai Family for import into Siemens TIA Portal environment.

UDT TIA Portal

Title: Conveylinx TIA Portal
Version: V1.0
Description: User Data Type (UDT) file for ConveyLinx-IO module for import into Siemens Step 7 TIA Portal environment.

BackupConverter Tool V1 18

Title: ConveyLinx Backup Converter
Version: V1.18
Description: The Documentation tool will provide a convenient way of using a ConveyLinx backup file and converting it into a report.

BackupConverter Tool V1 20

Title: ConveyLinx Backup Converter
Version: V1.18
Description: The Documentation tool will provide a convenient way of using a ConveyLinx backup file and converting it into a report.

BackupConverter Tool V1 22

Title: ConveyLinx Backup Converter
Version: V1.22
Description: The Documentation tool will provide a convenient way of using a ConveyLinx backup file and converting it into a report.

Quick Guide

Publication Number: ERSC-1100
Title and Version: Conveylinx Document Quick Guide V1.1
Description: This guide is intended for users who need to utilize the ConveyLinx Converter and Document tool.

Accel Decel Time Distance auto calculation

Accel and Decel Time Distance Calculator
Description: Use this document to calculate time and Distance depending on Accel or Decel of a motor.

ConveyLogix 2 02

Title: ConveyLogix Tool
Version: V2.02 Release Candidate
Description: The tool will provide a convenient way of writing and loading custom programming package using your choice of ladder, function bLock or structured text.

****************New Enhancements****************
-Function Blocks
-User Defined Tags
-Structured Text
-Print Options
-Import/Export Function Block

****************Caution Not Backwards Compatible****************

ConveyLogix V2 02 01

Title: ConveyLogix Tool
Version: V2.02.01
Description: The tool will provide a convenient way of writing and loading custom programming package using your choice of ladder, function bLock or structured text.

****************New Enhancements****************
-Function Blocks
-User Defined Tags
-Structured Text
-Print Options
-Import/Export Function Block

****************Caution Not Backwards Compatible****************

ConveyLogix V2 07

Title: ConveyLogix Tool
Version: V2.07
Description: The tool will provide a convenient way of writing and loading custom programming package using your choice of ladder, function bLock or structured text.

****************New Enhancements****************
-Function Blocks
-User Defined Tags
-Structured Text
-Print Options
-Import/Export Function Block

****************Caution Not Backwards Compatible****************

ConveyLogix V2 09

Title: ConveyLogix Tool
Version: V2.09
Description: The tool will provide a convenient way of writing and loading custom programming package using your choice of ladder, function bLock or structured text.

****************Caution Not Backwards Compatible****************

Programmer Guide

Publication Number: ERSC-1200
Title and Version: ConveyLogix Programmer Guide V2.1
Description: This manual is intended for users who need to utilize the ConveyLogix progamming software and download to a ConveyLinx or ConveyNetIP Card.

ConveyStop V1 15 TRIAL

Title: ConveyStop Tool
Version: V1.15
Description: ConveyStop software Trial tool activates the ConveyLinx system to be aware of and trigger any stop conditions. Connect one or multiple stop/reset buttons up to any ConveyLinx control port, configure the software tool, and ConveyLinx takes care of the rest. The trial version only allows up to 20 nodes to be configured or connected. To activate more nodes for a complete system contact us.
Note: Username/Password = admin/admin - You must login to create a project.

User Guide

Publication Number: ERSC-1800
Title and Version: ConveyStop User Guide V1.0
Description: This manual is intended for users who need to commission and engineer ConveyStop in conjuction with ConveyLinx ERSC modules to control simple linear conveyor.

KYO

Title: ConveyLinx Ai2 E-Plan Macro
Article #: 30-10-0002
Description: Please download and install for details of the ConveyLinx Ai2 PulseRoller product.

KYO

Title: ConveyLinx IO E-Plan Macro
Article #: 30-10-0003
Description: Please download and install for details of the ConveyLinx IO PulseRoller product.

KYO

Title: Eqube Ai E-Plan Macro
Article #: 30-10-0001
Description: Please download and install for details of the Eqube Ai PulseRoller product.

KYO

Title: E-Plan Macro for PULSEROLLER Product 2018
Article #: 06
Description: Please download and install for PulseRoller E-Plan Macros.

Makros Kyowa-Europe 2018-06

Title: E-Plan Macro for PULSEROLLER Product 2018
Article #: 06
Description: Please download and install for PulseRoller E-Plan Macros.

Makros Kyowa-Europe 2018-06 DE

Title: E-Plan Macro Documenation for PULSEROLLER Product 2018
Article #: 06
Description: Please download to see drawings and details of Macros in German.

Makros Kyowa-Europe 2018-06 EN

Title: E-Plan Macro Documenation for PULSEROLLER Product 2018
Article #: 06
Description: Please download to see drawings and details of Macros in English.

KYO

Title: MotionLinx Ai E-Plan Macro
Article #: 30-10-0004
Description: Please download and install for details of the MotionLinx Ai PulseRoller product.

KYO

Title: MotionLinx IO E-Plan Macro
Article #: 30-10-0005
Description: Please download and install for details of the MotionLinx IO PulseRoller product.

EasyRoll V4 21

Title: EasyRoll Tool
Version: V4.21
Description: EasyRoll is Conveylinx's primary configuration tool for making configuration changes to setup motor type, speeds, accel, decel, timers and many other parameters only available on ConveyLinx.

EasyRoll V3 20

Title: EasyRoll Tool
Version: V3.20
Description: EasyRoll is Conveylinx's primary configuration tool for making configuration changes to setup motor type, speeds, accel, decel, timers and many other parameters only available on ConveyLinx.

EasyRoll V4 07

Title: EasyRoll Tool
Version: V4.07
Description: EasyRoll is Conveylinx's primary configuration tool for making configuration changes to setup motor type, speeds, accel, decel, timers and many other parameters only available on ConveyLinx.

EasyRoll V4 19

Title: EasyRoll Tool
Version: V4.19
Description: EasyRoll is Conveylinx's primary configuration tool for making configuration changes to setup motor type, speeds, accel, decel, timers and many other parameters only available on ConveyLinx.

IQtool v1 4 04

Title: IQTool
Version: V1.4.04
Description: IQTool is used to configure basic settings for IQzonz standard ZPA controller. Configuration settings such as speeds, accel/decel, train release, and many other parameters.

Network Monitor V1 2 0

Title: ConveyLinx Network Monitoring Tool
Version: V1.2
Description: The ConveyLinx network monitor can be used to troubleshoot ConveyLinx Ethernet network media or hardware issues.

Users Guide

Publication Number: ERSC-1300
Title and Version: Conveylinx Network Monitor Tool V1.2
Description: This guide is intended for users who need to utilize the ConveyLinx Network Monitoring tool..

Accessories Literature & Drawings

Break-Out Modules

Drawings

IN-STR-RJ12-015

IN-STR-RJ12-015

IOX 3D Model

IOX CAD Drawing

IOX PDF Drawing

SE 3D Model

SE CAD Drawing

SE PDF Drawing

ConveySense

Diffuse Sensor

Diffuse Sensor

Diffuse Sensor Bracket

M12 to RJ-11 Adapter Cable

M12 RJ11 Converter

M12 RJ11 Converter

Retro-Reflective Sensor Kit

3D Model

CAD Drawing

PDF Drawing

MDRPower

120V 20Amp

3D Model

CAD Drawing

PDF Drawing

120V 40Amp

3D Model

CAD Drawing

PDF Drawing

480V 20Amp

3D Model

CAD Drawing

PDF Drawing

480V 40Amp

3D Model

CAD Drawing

PDF Drawing

Miscellaneous

ERSC RJ-11 Interlock Cable

CAD Drawing

PDF Drawing

JST Flying Leads Cable

CAD Drawing

PDF Drawing

Motor Extension Cables

CAD Drawing

PDF Drawing

Power Distribution

Power Distribution Harness

Power Distribution Harness

Power Tap Kit

Power Tap Kit

Assemblies

PDU-90

Drawings

2D Drawing

2D Drawing

Users Manual and Specifications

Installation Guide

PDU90 Template

Control Literature & Drawings

ConveyLinx

Drawings

ERSC 3D Model

ERSC CAD Drawing

ERSC PDF Drawing

ERSC-HTF 3D Model

ERSC-HTF CAD Drawing

ERSC-HTF PDF Drawing

Mounting Bracket

3D Model

CAD Drawing

PDF Drawing

SE Breakout Module

3D Model

CAD Drawing

PDF Drawing

Users Manual and Specifications