MDR|Power® - Power Distribution Solutions

MDR|Power affords an economical means of providing power to our Control and Roller products.

Benefits
CONTACT US
One power supply footprint with multiple inputs and amperages available, make it the perfect accessory.  MDR|Power modules are lockable, pre-wired to the power supply and terminals, and internally fused and protected. An automatic overheat shut-off mechanism gives you built-in heat protection for the convection cooled unit, and an alarm output ensures you will know about any problems quickly. And the clear, polycarbonate cover means you can easily monitor the status of the module.

Availability in 480VAC 3 Phase, 240VAC 1 Phase, or 120VAC single phase inputs with 24VDC outputs of 10, 20, or 40 amps. UL rated supplies also available upon request.
 
MotionLinx Ai
  • Pre-engineered
  • Lockable disconnect
  • Reduced voltage drops
  • Economical

Card title

Card subtitle

Some quick example text to build on the card title and make up the bulk of the card's content.

Card linkAnother link
  • Reduces Cost and Saves Time
  • Super Compact Design
  • Deterministic Network
  • Collects Important Information
  • Robust M8 Connections
  • CE ETL UL and IP54
    • Drawings - 120V 20Amp
    Drawings - 120V 40Amp
    Drawings - 480V 20Amp
    Drawings - 480V 40Amp
    Documentation
    Economical

    MDR|Power affords an economical means of providing power to our control and roller products. It has multiple inputs and amperages. 

    Easy to Install

    MDR|Power modules are lockable, pre-wired to the power supply and terminals, and internally fused and protected.

    -CE certified, RoHS compliant, IP54 raitng
    -ETL Certified to UL Standards (Optional)
    -Tube material:Mild stell, zinc plating/ Stainless steel (SUS304)
    -Roller diameter:48.6 mm (1.9"), 50.0 mm (1.97")
    57.0 mm (2.24"), 60.5 mm (2.38")
    -Min. roller length:Refer to the "Availale minimum roller length table" below
    -Max. roller length:1000 mm *Contact us for longer than 1000 mm.
    -Cable length:600 mm (SENERGY) / 1000 mm (SENERGY-Ai)
    *Contact us for extension cables
    -Motor Connector:JST (SENERGY) /M8-4pin (SENERGY-Ai)
    -Operation:0.5 sec ON / 0.5 sec OFF duty cycle (Minimum)
    or continuous within rated load

    Technical data

    ECO modeBOOST modeBOOST-8 mode
    VoltageDC24V
    Nominal Output40W50W50W
    Rated current 2.5A3.5A3.5A
    Starting current 3.0A5.0A8.0A
    Ambient temperature 14 ~ 140°F
    Ambient humidity 10 ~ 90% RH (No condensation)

    Characteristics data

    *Rated torque and rated tangential force of BOOST-8 are the same value as BOOST.*BOOST-8 performance is available with EZ-24HTB and ConveyLinx HTF card only
    Speed codeGear boxGear ratioECO modeBOOST & BOOST-8 mode
    Speed
    (f/min)    		Torque (in-lbf)Tangential force (lbf)Current (A)Speed
    (f/min)    		Torque (in-lbf)Tangential force (lbf)Current (A)
    RatedStartingRatedStartingRated (max)StartingRatedBOOST StartingBOOST-8 StartingRatedBOOST StartingBOOST-8 StartingRated (max)BOOST StartingBOOST-8 Starting
    153 stage45.006.4 ~ 64.726.2145.027.4151.62.53.06.4 ~ 46.847.4189.1215.049.9197.7224.83.55.08.0
    2033.008.8 ~ 88.319.2106.220.1111.08.8 ~ 63.934.9138.4157.436.5144.7164.5
    2527.0010.7 ~ 107.815.787.016.490.910.7 ~ 77.928.6113.5129.029.9118.6134.8
    352 stage18.3315.8 ~ 159.010.659.011.161.615.8 ~ 115.019.476.987.420.380.491.4
    4515.0019.2 ~ 194.08.748.39.150.519.2 ~ 140.315.963.071.616.665.974.9
    6011.0026.3 ~ 285.06.435.46.737.028.3 ~ 191.611.646.152.412.148.254.8
    759.0032.1 ~ 323.25.229.05.430.332.1 ~ 233.89.537.843.09.939.544.9
    951 stage6.818242.3 ~ 426.73.921.94.122.942.3 ~ 308.67.228.632.57.529.934.0
    1255.0057.7 ~ 581.92.916.13.016.857.7 ~ 420.85.321.023.85.521.924.9
    1753.666778.8 ~ 794.92.111.82.212.378.8 ~ 574.83.815.317.44.016.018.2
    2153.0096.2 ~ 969.81.79.61.810.196.2 ~ 701.33.112.614.33.313.114.9
    • Robust and Unique Gearbox Design significantly improves life expectancy
    • Provides wide ranges of Speed and Power using Low Energy
    • JST Cabling for Simple Installation and Robust Cable Routing, IP54
    • CE Approved
    • ROHS Compliant
    • ETL Certified to UL Standards Available
    • IP54 & IP66 Ratings Available
    • ETL Certified to UL Standards Available
    • High Torque Rollers Available
    • Freezer and Wash-Down Rated Rollers Available
    • Mechanical Braking Available

    Use our contact page to be directed to the correct sales channel.

    Need help? Contact our product specialists TODAY!
    CONTACT US

    FROM THE BLOG

    FROM THE BLOG

    FROM THE BLOG

    ProMat 2023 - Lessons Learned

    05/10/2023

    blog image

    Much like the migratory creatures of our animal kingdom, those of us in the material handling world make our biennial pilgrimage to Chicago to attend and/or present at the ProMat show.  It was different this year because there was no in-person show in 2021, thus whether we admit it to ourselves or not, I believe a lot of us were itching to go to

    Read More

    Reason #6 to Visit PULSEROLLER in Booth #S1991

    03/19/2023

    blog image

    Our NSF Certified Wash-Down Rated MDRs and Idlers. Reduce downtime needed to clean and sanitize!

    Read More

    Reason #5 to Visit PULSEROLLER in Booth #S1991

    03/17/2023

    blog image

    Our New Senergy-IDC is Drop in Compatible with Many 3rd Party Motor Controllers.

    Read More