MotionLinx-IO
EtherCAT Networked Digital IO

Integrator solutions for EtherCAT I/O.

MotionLinx-IO is our EtherCAT based Digital I/O module that compliments our MotionLinx-Ai motor controller to round out a complete EtherCAT based integration platform.  MotionLinx-IO contains 8 I/O points that can each be configured individually to be an input or an output.

MotionLinx-IO is also a configurable 8 digital input or 8 digital output (or any combination) I/O block that operates on only an EtherCAT network with a master controller. The MotionLinx-IO has the same footprint, power, M8 IO connections as the ConveyLinx-Ai2 model.

Ordering Information

  • IP54 Environmental Rating
  • Separate power connection for digital outputs for E-Stop isolation
  • Compact design that matches MotionLinx-Ai size and footprint
  • Near real time response with deterministic EtherCAT network topology

General Technical Data

  • Available Tube Diameters: 48.6 mm (1.9”), 50 mm (1.97”), 60.5 mm (2.38”)
  • Motor Input Voltage: 21 to 28 VDc
  • Rated Motor Output Current: N/A
  • Available Starting Current: N/A
  • Power Connection Integrated: 3 Pole Cage Clamp
  • Motor Connection: N/A
  • Sensor & I/O Connection: 4 Pin M8 x 4
  • Network Connection: RJ-45 x 2
  • Ambient Temperature: 0° ~ 40°C (32° ~ 104°F)
  • Ambient Humidity: 10 ~ 90% RH (No Condensation)
  • Vibration: 1G or less
  • Certifications:CE | ETL Listed to UL 61010-2 & UL 61010-2-201 | UL Recognized to UL 61800-5-1

Drawings