Senergy Motor Drive Roller

Senergy motor drive rollers are powerful, efficient, and versatile solutions suitable for virtually any unit handling conveying application. Senergy MDRs can reach speeds up to 1000 fpm, with a starting torque up to 215 in/lbs, and have reduced energy costs by up to 70%!

CONTACT US

Senergy’s combination of speed and power allows them to be used in lower speed, heavy-duty applications such as pallet handling, as well as for high-speed carton or tote handling.

They operate at a low 40 dba, quieter than a typical conversation. They utilize a safe and effective 24VDC power supply and consume up to 70% less energy than alternatives.

Senergy’s power and efficiency are derived from a unique planetary gearbox design and a powerful brushless DC motor.  Senergy features only 11 gearbox combinations. This makes ordering and stocking MDRs much more manageable.

Senergy’s range and performance characteristics are suitable for speeds between 6 to 969 fpm and starting torque up to an amazing 215 in/lbs.

Regardless of the project, type of conveyor, the weight or speed of the load you really only need one type of roller. Senergy!

  • Robust and unique gearbox design significantly improves life expectancy
  • Provides wide ranges of speed and power using low energy
  • JST connectors for fast Installation
  • IP54, IP66 & IP67 ratings available
  • High torque with up to 50 watts of power
  • Freezer and washdown rated rollers available
  • Mechanical holding brake option available
MotionLinx Ai

Card title

Card subtitle

Some quick example text to build on the card title and make up the bulk of the card's content.

Card linkAnother link
  • Reduces Cost and Saves Time
  • Super Compact Design
  • Deterministic Network
  • Collects Important Information
  • Robust M8 Connections
  • CE ETL UL and IP54
  • Bracket Drawings
    Compatible Controls

    Modular & Simple Install

    A conveyor section powered by a single Pulseroller Senergy motor drive roller (MDR) is mechanically linked with just enough free-turning (gravity type) rollers to constitute a controllable zone. This zone is usually not much longer than the item to be conveyed. With the proper control system strategy, an end-user can easily assemble individual MDR zones like building blocks to make zero pressure accumulation conveyor subsystems.

    Instead of having a single 100 ft. accumulation conveyor with a 5HP, 480-volt motor that's always running, and an air feed drop for each zone, you can now effectively have ten manageable 10 ft. modular accumulation conveyors. Each one typically consists of 4 zones at 30 in. each, per 10 ft. section, all connected. This new configuration removes the troublesome air and air piping that are prone to leaks, and your power sourcing can be as simple as plugging into a standard 120-volt household wall receptacle. Most importantly, the motors only run when and where the product is present, significantly reducing energy consumption.

    Saves Energy

    One of the greatest advantages of motorized drive roller conveyors is the fact that, with the proper control system strategy, MDR zones run just 10-50% of your operational time. Contrast this with conventional conveyors which typically run all the time whether they are accumulating product or not. This means you will enjoy significant energy savings with a Senergy MDR. Customers are seeing energy savings from 30 to 70%.

    Safer

    Our Senergy motorized drive roller is powered by 24 volts DC, and has no major pinch points. It provides just enough motive power and torque to control a short zone, and there is never enough drive power to be considered dangerous. In most cases, you can literally grab a running motorized roller with your bare hand and make it stop with only a handshake grip.

    Quiet

    Conveyor systems powered by Senergy MDRs are much quieter than conventional conveyors. They operate only when necessary and at a quiet 40dB.

    Truly Plug and Play

    The phrase "plug and play" has become ubiquitous in product marketing. Many companies and products promise you plug and play for obvious reasons, but in truth they fail to deliver the plug or the play. When you use Senergy and ConveyLinx together in your motorized drive roller conveyor systems, plug and play becomes a reality.

    Conveylinx and Senergy are installed with simple plug in style JST or M8 connectors. With our patented installation process the "play" in many cases, is as easy as pressing a button on the ConveyLinx card or via our EasyRoll software. Taking it a step further, when customizations are necessary, you simply plug in an Ethernet cable to connect ConveyLinx to your PC running EasyRoll. Simple as can be!

    Reduced Maintenance Costs

    It’s simple. Because our Senergy MDRs run only as needed, there's less wear and tear on components. We use sealed for life bearings, and most of our motors are interchangeable. This means you only have to stock one spare part.  

    Reduced Inventory

    For the entire range of gearboxes available for the Senergy product, the same identical electric motor is used. The electrical performance is governed by the separate PULSEROLLER control module. This means that you get a full range of performance by only needing to select the proper gearbox and not a confusing combination of separate electric motors and gearboxes. This can result in a single Senergy part number replacing multiple motors in legacy installations.

    Conformance:CE, RoHS, IP54
    Certifications:ETL Listed to UL 1004-1 & UL 1004-6
    Tube Material Options:Zinc Plated Mild Steel, Stainless (SUS304)
    Available Roller Diameters:48.6 mm (1.9"), 50.0 mm (1.97")
    57.0 mm (2.24"), 60.5 mm (2.38")
    Min. Roller Length:Refer to the "available minimum roller length" table
    Max. Roller Length:1000 mm
    Cable Length:600 mm
    Motor Connection:9-Pin JST
    Duty Cycle: 0.5 sec ON / 0.5 sec OFF minimum
    Operation:Continuous at rated load/current without overheating

    Technical data

    ECO modeBOOST modeBOOST-8 mode
    VoltageDC24V
    Nominal Output40W50W50W
    Rated current 2.5A3.5A3.5A
    Starting current 3.0A5.0A8.0A
    Ambient temperature -10 ~ 40°C (14 ~ 104°F)
    Ambient humidity 10 ~ 90% RH (No condensation)

    Available Minimum Roller Length (mm)

    Motor TypeSpeed CodeInterlocking option
    Plain straight
    Micro
    V-pulley
    Round
    Groove Pulley
    Round
    Groove
    SENERGY
    48.6 / 50.0
    15, 20, 25325318325357
    35, 45, 60, 75301294301333
    95, 125, 175, 215 274267274306
    SENERGY-Ai
    48.6 / 50.0
    15, 20, 25
    330323330362
    35, 45, 60, 75306299306338
    95, 125, 175, 215 279272279311

    Available Speed Codes with Performance Data

    Speed CodeGear BoxReduction RatioECO-Mode
    Speed
    (m/min)
    Torque (N-m)Tangential Force (N)Current (A)
    RatedStartingRatedStartingRated (max)Starting
    153 stage452.0 ~ 19.72.916.3122.2647.62.53.0
    20332.7 ~ 26.92.112.089.4493.8
    25273.3 ~ 32.81.79.873.3404.7
    352 stage18.34.8 ~ 48.51.26.649.7274.3
    45155.9 ~ 59.10.95.440.7224.8
    60118.0 ~ 80.80.74.029.8164.6
    7599.8 ~ 98.50.53.224.4134.9
    951 stage6.8112.9 ~ 130.10.42.418.5102.2
    125517.6 ~ 177.40.31.813.574.9
    1753.624.0 ~ 242.30.21.39.954.8
    215329.3 ~ 295.60.11.08.144.9
    ¹ Rated Torque and Tangential Force values are the same for BOOST and BOOST-8² BOOST-8 performance only available with EZ-24HTB, ConveyLinx-HTF, ConveyLinx-Ai2, and MotionLinx-Ai controllers
    Speed CodeGear BoxReduction RatioBOOST & BOOST-8 Mode¹ ²
    Speed
    (m/min)
    Torque (N-m)Tangential Force (N)Current (A)
    RatedBOOST StartingBOOST-8 StartingRatedBOOST StartingBOOST-8 StartingRated (max)BOOST StartingBOOST-8 Starting
    153 stage452.0 ~ 14.35.421.324.3222.2879.61000.03.55.08.0
    20332.7 ~ 19.53.915.617.7162.6643.8732.0
    25273.3 ~ 23.83.212.814.5133.3527.7600.0
    352 stage18.34.8 ~ 35.02.18.69.890.3357.7406.6
    45155.9 ~ 42.81.87.18.174.0293.2333.3
    60118.1 ~ 58.41.35.25.954.2214.6244.0
    7599.8 ~ 71.31.04.24.844.4175.9200.0
    951 stage6.8112.9 ~ 94.10.83.23.633.6133.2151.5
    125517.6 ~ 128.30.62.32.724.697.7111.1
    1753.624.0 ~ 175.20.41.71.918.071.581.3
    215329.3 ~ 213.80.31.41.614.858.666.6
    Certifications:
    - Conformance: CE, RoHS, IP54
    - Certifications: ETL Listed to UL 1004-1 & UL 1004-6
    - Wash-Down IP Rating: IP66 Environmental Rating
    - Wash-Down Rated NSF Certified 

    Use our contact page to be directed to the correct sales channel.

    Need help? Contact our product specialists TODAY!
    CONTACT US

    FROM THE BLOG

    FROM THE BLOG

    10/01/2020

    blog image

    Looking back on my childhood, sometimes I think it is a wonder some of us survived.  My mother had 5 children and worked full time as a nurse.  Understandably, after a hard day at the hospital, she often tended to be a bit lax on keeping constant tabs on all 5 of us.  I can hear her now shouting out into the back yard or into the basement where

    Read More

    08/12/2020

    blog image

    Save Days in the Field!

    Read More

    08/12/2020

    blog image

    Ai is a PULSEROLLER patented technology and stands for "Advanced Intelligence."

    Read More